IMPORTANT INSTRUCTIONS - DO NOT DESTROY

TO INSTALL NEW BULB IN POLE:  Bulb can be replaced very easily by following these instructions.  REPLACEMENT OF BULB MUST BE FROM TOP OF THE POLE -- NEVER THE BOTTOM

1) Remove stainless steel top.
2) Loosen screws that hold bridge assembly to pole.
3) Remove the two screws that hold plastic part to top of inner cylinder.

After replacing bulb, reverse order of above procedures.

USE OF INCORRECT SIZE LIGHT BULBS WILL VOID THE WARRANTY ON THE INNER CYLINDER IN YOUR POLE.

RECOMMENDED GUIDELINES FOR BULBS:

MODELS  333, 405, and 410  -  Use 15A15 light bulb.

MODELS  55 and 77  -  Use either 25T10/F, 40T10/F, or 18-watt Fluorescent bulbs.

MODELS 88 and 824  -  Use either 40T10/F, 75A/RS, or 18-watt Fluorescent bulbs.

ALWAYS USE CORRECT SIZE LIGHT BULB FOR MAXIMUM LIFE OF INNER CYLINDER.