10½" Long  X  7¼" Wide

PDF file

These specifications are in the Adobe Acrobat format, which you can view, print, save or exit as needed.
If you do not have Adobe Acrobat Reader, DOWNLOAD HERE for free.

Dryer Filters

$ 10.00 each

$ 9.50 in lots of 3  /  $ 9.00 in lots of 6 or more

Please phone 1-800-643-0333 for assistance.

by Belvedere

Fits:
 Fits: Belvedere Dryer Models # B810, B870, 9500 and 9500A

* (UL/CUL Listed. 120 Volts, 8.3 Amps., 930 Watts)
* Spring Coil Heating Element on Red Board
* Thermal Limiter PURCHASED SEPARATELY

by Belvedere

* THIS PART ATTACHES TO THE HEATER ASSEMBLY

* Thermal Limiter ( keeps dryer for over heating)

Fits: Belvedere Dryer Model # B810, B700 Real Hot, B900 Mega,
9500A, 9501A, 9507B

by Belvedere

Fits: Belvedere Dryer Model # B810, B870 First Lady, B700 Real Hot, B900 Mega, 9500A, 9501A, 9507B

by Belvedere

Fits: Belvedere Dryer Model # B810, B870 First Lady, B700 Real Hot, B900 Mega, 9500A, 9501A, 9507B

by Belvedere

Belvedere Dryer Model # 810, 9500A & 9507B

* Flat Top
* Base 1-3/4" Diameter
* 1" Height

by Belvedere

Fits: Belvedere #B810, B700 Real Hot, B900 Mega, & B900B

* Round Knob with Flat Slopped Top
* Base 1-3/4" Diameter
* 1" Height

by Belvedere

"D" Shape Shaft (the shaft has one side flat)
when looking on the end of the shaft or the end of the impeller (fan blade) there is a "D" Shape
 

Fits:
Belvedere Dryer Model # 810 and MODEL # HM1000
SER # 134489 older Advant Garde Dryer

by Belvedere

* Filter Dimension 2.75" x 4.75" x .5"
* Small foam filter fits under grill on top of dryer next to stack
* Fits: Belvedere #B900 Mega, B700 Real Hot & B810 Dryers

by Belvedere

* Air Inlet Cover Size: 2.75" x 4.75"
* This is the grill on top of dryer beside of stack
* Fits: Belvedere #B900 Mega, B700 Real Hot & B810 Dryers

by Belvedere

* Filter Dimension 5" x 14" x .5"
* Fits: Belvedere B810 Dryer
* Fits in Neck of Dryer

by Belvedere

For NEWER Model # 9500A Belvedere Avant Garde Dryer
And Model # B700 Real Hot Dryer And Model # B810 Dryer
* Color: BLACK
* Material: METAL
* 42-1/4" Long
* Screw Fastener

by Belvedere

* This the Band that Holds the Inner and Outer Hood together
* Fits Belvedere (Advant Garde) before 2001, Central Beauty Equipment, Zotos, Helen Curtis and some Brentwood Dryers
* All These Dryers are OLDER Salon Dryers made before 2001
* Measures 41.5" to 42" Long
* Best way to be sure this Fits Your Dryer Hood is to Measure the
Distance around the Outer Rim of the inner or outer Dryer Hood
This Measurement should be between 41.5" to 42.5"
* In the past some use to be Black (Not Available) and some Chrome Plastic
* This Replacement is Chrome Plastic with spring clip fastner

by Belvedere

For NEWER Model # 9500A Belvedere Avant Garde Dryer
And Model # B700 Real Hot Dryer And Model # B810 Dryer
* Color: BLACK
* Material: PLASTIC
* 42-1/4" Long Rim
* Rim Fastener: Screw

Note:  Hood NO LONGER comes in Smoke color * Black Only

THIS HOOD IS NO LONGER MADE AND OUT OF STOCK for replacement parts purchase 1 of each of the following:
* Outer Hood
* Inner Hood
* Hood Band
* or Complete Assembly with Neck

by Belvedere

* This is the Plastic part that fits between the Dryer cabinet and the Stack that allows the stack to move back and forth

* Fits: Belvedere Dryer Model # B810, # B870 First Lady, B700 Real Hot, B900 Mega, 9500A Avant Garde, 9501A Avant Garde Plus Salon Dryers
* Also Fits Old Helen Curtis, Naturelle and Zotos Salon Dryers

* Overall Dimensions: 3-7/8" x 9"
* Stack Opening: 3-3/8" x 2-1/2"
* Black Plastic

Installing Slide Collar Instructions
 

by Belvedere

* This the part that slides up and down and connects to the Outer Hood
* Fits Belvedere, Avante Garde # B810, Avante Garde Pluse Dryer Model # 9501A, #9500A and Mega Dryer Model # B900

by Belvedere

* This Split Pin Attaches the Inner Stack to the Blower Housing
* Material: Metal
* Color: Chrome
* After Pin is inserted through inner stack and blower housing the End is spread apart to hold pin in place