Barber Poles CacheBeauty.com
.....Proudly Keeping America Beautiful since 1976 !

    sitemap

Visa MasterCard American Express Discover

Phone: 1-800-643-0333

Shopping Index         Wholesale

 

Product Categories

    Barber Poles:  Barber Pole Parts

Glass Outer Cylinders

Plastic Inner Cylinders

Paper Inner Cylinders

Fluorescent Light Sleeves

Motor Mounting Plates

Motor Coil

Top Cylinder Bushings

Stainless Steel Domes & Bowls

Special Order Light Fixtures

Plastic Globes
Glass Globes

Replacement Parts

for

Marvy - Koken - Koch & Paidar

Barber Poles




 

PDF file: Help with Parts

Phone for any extra help:  1-800-643-0333

Barber Pole Wiring Diagram

General Spec Sheet on Barber Poles


Glass Outer Cylinders

 

 

Barber Pole Part: Glass Outer Cylinder 4" x 10"

 

* Heavy Glass Cylinder
* 4" Diameter X 10" Long
* Fits Marvy poles #410

Barber Pole Part: Glass Outer Cylinder 4" x 10"  $76.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 4" x 16"

 

* Heavy Glass Cylinder
* 4" Diameter X 16" Long
* Fits Marvy poles #333, 405 & 607

Barber Pole Part: Glass Outer Cylinder 4" x 16"  $89.95   
 

 

 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 4" x 20"

 

* Heavy Glass Cylinder
* 4" Diameter X 20" Long
* Fits Marvy poles #506

Barber Pole Part: Glass Outer Cylinder 4" x 20"  $107.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 6" x 16"

 

* Heavy Glass Cylinder
* Fits Marvy Pole No. 55
* Fits Marvy Pole No. 44, & 66
* Also Fits Koken Poles, No. 5162, 5156, 741, 742, 13, 23, 5151,
277 & 278

Barber Pole Part: Glass Outer Cylinder 6" x 16"  $144.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 6" x 17"

 

* Heavy Glass Cylinder
* 6" Diameter X 17" Long
* Fits Koch & Paidar poles

Barber Pole Part: Glass Outer Cylinder 6" x 17"  $147.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 6" x 20"

 

* Heavy Glass Cylinder
* 6" Diameter X 20" Long
* Fits Marvy pole #77 & Koken poles

Barber Pole Part: Glass Outer Cylinder 6" x 20"  $152.95   
 

 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 6" x 30"

 

* Heavy Glass Cylinder
* 6" Diameter X 30" Long
* Fits Marvy pole #90, Koch & Paidar poles

Barber Pole Part: Glass Outer Cylinder 6" x 30"  $194.95   
 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 8" x 19"

 

* Heavy Glass Cylinder
* 8" Diameter X 19" Long
* Fits Koch & Paidar poles

Barber Pole Part: Glass Outer Cylinder 8" x 19"  $205.95   
 

 

 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 8" x 20"

 

* Heavy Glass Cylinder
* 8" Diameter X 20" Long
* Fits Marvy pole #88 & Koken poles

Barber Pole Part: Glass Outer Cylinder 8" x 20"  $210.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 8" x 22"

 

* Heavy Glass Cylinder
* 8" Diameter X 22" Long
* Fits Koch & Paidar poles

Barber Pole Part: Glass Outer Cylinder 8" x 22"  $236.95   
 

 

 

*******************************************************

 

 

 

Barber Pole Part: Glass Outer Cylinder 8" x 24"

 

* Heavy Glass Cylinder
* 8" Diameter X 24" Long
* Fits Marvy pole #824 & Koken poles

Barber Pole Part: Glass Outer Cylinder 8" x 24"  $254.95   
 

 

 

 

 

 

Marvcyl Plastic Inner Cylinders

 

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 10"

 

* Plastic Inner Cylinder
* Fits: Marvy 410 pole
* 3-1/4" Diameter X 10" Long
* Red, White & Blue PLASTIC Inner Cylinder
* WEIGHT with Metal Ends: 1.5 ounces
* for Type "A" Motor

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 10"  $47.95   
 

*******************************************************


Fits all Marvy 410 Poles

Marvy Part:  Plastic Inner-Cylinder "Poodle" * 3-1/4" x 10"
Fits ALL Marvy 410 poles

 

* Great for Dog Grooming
* Size of Inner Cylinder: 3.25" Diameter X 10" long
* WEIGHT with Metal Ends: 2.5 ounces
* for Type "A" Motor

Marvy Part: "Poodle" Plastic Inner Cylinder 3-1/4" x 10"  $ 67.95   
 

 

*******************************************************

 

 

 

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 16"

 

* Plastic Cylinder
* 3-1/4" Diameter X 16" Long
* Fits Marvy poles #405 & 607

* WEIGHT with Metal Ends: 2 ounces
* for Type "A" Motor

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 16"  $47.95   
 



*******************************************************

 

 

 

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 20"

 

* Plastic Cylinder
* 3-1/4" Diameter X 20" Long
* Fits Marvy poles #506

Barber Pole Part: Plastic Inner Cylinder 3-1/4" x 20"  $47.95   
 

 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 3-1/2" x 16-1/2"

 

* Plastic Cylinder (Available ONLY without Metal Ends)
* 3-1/2" Diameter X 16-1/2" Long
* Fits Marvy poles #333

Barber Pole Part: Plastic Inner Cylinder 3-1/2" x 16-1/2"  $44.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 4" x 14-1/2"

 

* Plastic Cylinder (Available ONLY without Metal Ends)
* 4" Diameter X 14-1/2" Long
* Fits Paidar poles #928

Barber Pole Part: Plastic Inner Cylinder 4" x 14-1/2"  $63.95   
 


*******************************************************

 

 

  

"Sheet Metal Strap"

on bottom of old cylinder shown here

 

Barber Pole Part: Plastic Inner Cylinder 5" x 16-1/2"
Note:
This is a real unusual inner cylinder see notes below.
You MUST have the Sheet METAL STRAP from the Bottom of the old inner cylinder to put on this new inner cylinder to make it work.
This Strap allowed the inner cylinder to set lower or in other words the out put shaft of the motor connected to the metal strap up in the inner cylinder. (Metal Strap is fasten on with 2 screws, the bottom and top metal ends are the same)
If you do not have the Strap then we will need to make you a
5-1/4" x 16" Inner Cylinder with Type "A" or Type "B" end
or
5" x 17" (a little shorter) with Type "A" or Type "B" end
NOTE: we will need to know what type motor your pole has to make the above inner cylinder or provide us the stamped number on the bottom of your inner cylinder (see below).

 

* Plastic Cylinder
* 5" Diameter X 16-1/2" Long
* Fits Koch and Paidar Poles Nos 95, 96, 195 & 196
* Must Re-Use strap from old lower end

If the Serial Number on your pole is above # 5500 it may be a type "A" motor. Prior to that they was type "B" motors
Note: the Koch/Paidar company used the last two digits of the year the pole was produced for the first two digits of the serial number for the pole.
Note: If the Inner Cylinder you presently have has a marking on the bottom of the metal end with "2A4" in it then this is the Plastic Inner Cylinder that will fit your Pole. Like: "2A4 ## ## "

*** MUST RE-USE METAL STRAP from LOWER END ***

***See Image On Left***

If number on bottom of inner cylinder is "1A XX XX" then a inner cylinder will need to be custom made for you so please call us at 800-643-0333

There are THREE Inner Cylinders to chose from for this replacement cylinder
The difference is dependent upon if you have the original "Sheet Metal Strap" on the bottom of the old inner cylinder.
If you have the original "Sheet Metal Strap" then you will need the inner cylinder with the open bottom end.
Other wise you will need to pick from the other two depending upon how it attaches to the motor Type "A" or Type "B"
See the pictures to the left of the 3 inner cylinders below to match up the bottom of the inner cylinder with how your motor will connect with the inner cylinder.

 

Barber Pole Part: Plastic Inner Cylinder 5" x 16-1/2"

* open center ends to reuse the original"Sheet Metal Strap" 

$69.95

 

Barber Pole Part: Plastic Inner Cylinder 5" x 16-1/2"

* for TYPE ''A'' Bottom 

$69.95

 

Barber Pole Part: Plastic Inner Cylinder 5" x 16-1/2"

* for TYPE ''B'' Bottom

$69.95

 

*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 5" x 17"

 

* Red, White & Blue Plastic Inner Cylinder
* Plastic Cylinder with Metal Ends Attached
* 5" x 17" inner cylinder
* Fits: Koch & Paidar poles
* Usable on Koch and Paidar Barber Poles which use a 6" diameter glass cylinder X 17" Length
* Replaces Old style inner cylinder requiring the "flattened spearshaped nail" on bottom metal end to fit the brass cup on type "B" motor (these "old style" inner cylinders were used on Koch-Paidar poles made previous to 1955)
* Fits Type "B" Motor


Barber Pole Part: Plastic Inner Cylinder 5" x 17"  $66.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 5" x 29-1/2"

 

* Plastic Cylinder
* 5" Diameter X 29-1/2" Long
*
Fits Marvy poles #99, Koch & Paidar

Barber Pole Part: Plastic Inner Cylinder 5" x 29-1/2"  $104.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 5-1/4" x 16"

 

* Plastic Cylinder
* 5-1/4" Diameter X 16" Long
*
Fits Marvy poles #55, 66 & Koken poles
* Weight with metal ends: 3.5 ounces
* For Type "A" Motor

Note: If the Inner Cylinder you presently have has a marking on the bottom of the metal end with "1A" in it then this is the Plastic Inner Cylinder that will fit your Pole. Like: "1A#### "

 

Barber Pole Part: Plastic Inner Cylinder 5-1/4" x 16"  $69.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 5-1/4" x 20"

 

* Plastic Cylinder
* 5-1/4" Diameter X 20" Long
*
Fits Marvy poles #77 & Koken poles

Barber Pole Part: Plastic Inner Cylinder 5-1/4" x 20"  $81.95   
 


*******************************************************

 

 

Barber Pole Part:
PLASTIC INNER-CYLINDER
6.75" x 19"
* for Type "B" motor *

 

Barber Pole Part:
* Red, White & Blue Plastic Cylinder
* 6-3/4" Diameter X 19" Long
* Fits Koch & Paidar - Type "B" Motor
* Available with Hair Stylist design, on request

 

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 19"  $88.95   
 


*******************************************************

Barber Pole Part:
PLASTIC INNER-CYLINDER
6.75" x 19"
* for Type "A" motor *

Barber Pole Part:
* Red, White & Blue Plastic Cylinder
* 6-3/4" Diameter X 19" Long
* Fits Koch & Paidar - Type "A" Motor
* Available with Hair Stylist design, on request

 

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 19" Type ''A''  $91.95
 


*******************************************************

 

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 20"

 

* Plastic Cylinder
* 6-3/4" Diameter X 20" Long
*
Fits Marvy poles #88 & Koken poles
* Available with “Hair Stylist” design, on request

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 20"  $88.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 22"

 

* Plastic Cylinder
* 6-3/4" Diameter X 22" Long
*
Fits Koch & Paidar - Type "B" Motor unless Type "A" Motor is requested
* Available with “Hair Stylist” design, on request

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 22"  $88.95   
 


*******************************************************

 

 

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 24"

 

* Plastic Cylinder
* 6-3/4" Diameter X 24" Long
*
Fits Marvy poles #824 & Koken poles
* Available with “Hair Stylist” design, on request

Barber Pole Part: Plastic Inner Cylinder 6-3/4" x 24"  $88.95   
 

 

Paper Inner Cylinders

Barber Pole Part: Paper Inner Cylinder 3-1/4" x 10"

 

* Fits Marvy model 410
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 3-1/4" Diameter x 10" Long

Barber Pole Part: Paper Inner Cylinder 3-1/4" x 10"  $47.95   
 

*******************************************************

Barber Pole Part: Paper Inner Cylinder 3-1/4" x 16"

 

* Fits Marvy model 405 & 607
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 3-1/4" Diameter x 16" Long

Barber Pole Part: Paper Inner Cylinder 3-1/4" x 16"  $47.95   
 

*******************************************************

Barber Pole Part: Paper Inner Cylinder 5-1/4" x 16"

 

* Fits Marvy model #55, 66 & Koken poles
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 5-1/4" Diameter x 16" Long

* Weight with metal ends: 3.5 ounces
* For Type "A" Motor

NOTE: If the Inner Cylinder you presently have has a marking on the bottom of the metal end with "1A" in it then this is the Plastic Inner Cylinder that will fit your Pole. Like: "1A#### " or for Paper like: "P 1A#### "

Barber Pole Part: Paper Inner Cylinder 5-1/4" x 16"  $66.95   
 

*******************************************************


 
Barber Pole Part: Paper Inner Cylinder 6-3/4" x 19"

For Type "B" Motor

* Fits Koch & Paidar - Type "B" Motor
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 6-3/4" Diameter x 19" Long

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 19"  $81.95   
 

*******************************************************

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 19"

For Type "A" Motor

* Fits Koch & Paidar - Type "A" Motor
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 6-3/4" Diameter x 19" Long

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 19"  $81.95   
 

*******************************************************

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 20"

 

* Fits Marvy model #88 & Koken poles
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 6-3/4" Diameter x 20" Long

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 20"  $81.95   
 

*******************************************************

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 24"

 

* Fits Marvy model #824 & Koken poles
* Red, White & Blue Paper Inner Cylinder
* Paper (Preferred for Restoration of Old Barber Poles)
* The Paper Inner Cylinder will have a YELLOW cast color making it look antique
* Size 6-3/4" Diameter x 24" Long

Barber Pole Part: Paper Inner Cylinder 6-3/4" x 24"  $81.95   
 

 

Fluorescent Light Sleeves

Part Fluorescent Light Sleeve
* Red, White, Blue 18"

* For use over Fluorescent Light Tube

Part Fluorescent Light Sleeve * 18"   $23.45   
 

*******************************************************
 

Part Fluorescent Light Sleeve
* Red, White, Blue 24"

* For use over Fluorescent Light Tube

Part Fluorescent Light Sleeve * 24"      No longer made and out of stock

 

 

 

Replacement Lamps for Barber Poles

 

 

Marvy Barber Pole Part: Lamp for
Barber Pole 15W

15A15
* 130 V, Appliance size, (15 watt)
FOR POLES WITH 4" DIAMETER GLASS


PLEASE NOTE: Above lamp is special long-life lamp, good for approximately 2,500 hours.

Light Bulb Replacement Instructions

Marvy Barber Pole Part: Lamp for 15W   $5.95   
 

*******************************************************

 

Marvy Barber Pole Part: Lamp for
Barber Pole 25W

25T10/F
* 130 V, (25 Watt tubular type lamp, 5-1\4" Length,
sometimes called a showcase lamp)
FOR POLES WITH 6" DIAMETER GLASS

PLEASE NOTE: Above lamp is special long-life lamp, good for approximately 2,500 hours.

Light Bulb Replacement Instructions

Marvy Barber Pole Part: Lamp for 25W   $7.95   
 

*******************************************************

 

Marvy Barber Pole Part: Lamp for
Barber Pole 40W

40T10/F
* 130 V, (40 watt tubular type lamp, 5 " length,
ometimes called a showcase lamp)
FOR POLES WITH 6" DIAMETER GLASS

PLEASE NOTE: Above lamp is special long-life lamp, good for approximately 2,500 hours.

Light Bulb Replacement Instructions

Marvy Barber Pole Part: Lamp for 40W   $8.95   
 

*******************************************************

 

Marvy Barber Pole Part: Lamp for
Barber Pole 75W

75A/RS
* 130 V, (75 watt Commercial Service Lamp)
FOR POLES WITH 8" DIAMETER GLASS
* Printed on Bulb: "Supreme Rough Service"
* This Lamp is also the heat lamp for the model 19 Steril-Ray

PLEASE NOTE: Above lamp is special long-life lamp, good for approximately 2,500 hours.

Light Bulb Replacement Instructions

Marvy Barber Pole Part: Lamp for 75W   $8.95   
 

*******************************************************

 

Marvy Barber Pole Part:  Lamp for
Barber Pole 18W

* 18 Watt-Compact Fluorescent Screw-in Bulb
New- High efficiency, long-life, 1200 lumens

PLEASE NOTE:  For poles with 6" and 8" diameter glass good for approximately 10,000 hours

Light Bulb Replacement Instructions

Marvy Barber Pole Part: Lamp for 18W   $19.95   
 

 

Barber Pole Motors

Barber Pole Part: Type "A" Motor

Barber Pole Part: Motor Type "A" with roll pin through out put shaft

* Motor: 30 RPM Model AB
* 115 Volt, 60 HZ, 5 Watt
* Has 4 Wires: Red and Black wires connected with Resistor between them, 2 Blue wires connected together (Therefore ONLY 2 wires to connect to Pole wiring) 2 - Wire Nuts included.
* Refer to Wiring Diagram to wire pole for Three Way Switch, Single Toggle Switch, Double Toggle Switch or Line Cord.
* Includes Mounting instructions for Motor
* On Back of Instructions is Template to Locate and Drill Holes in Mounting Plate to mount Motor
* Also includes is 2 Pan Head Bolts and Rubber Grommets used to mount Motor to Mounting Plate
* This motor has a "cross-pin" on the output shaft
* Fits all Marvy and all Koken Barber Poles
* It also Fits some Koch & Paidar Barber Poles

Barber Pole Wiring Diagram

Click here for Installation Instructions Page 1; Page 2

Barber Pole Part: Type "A" Motor  $ 104.95   
 


*******************************************************

 

 

Barber Pole Part: Type "B" Motor

Barber Pole Part: Motor Type "B" with "Brass Cup" affixed to the top of the output shaft

* Motor: 30 RPM Model AB
* 115 Volt, 60 HZ, 5 Watt
* Has 4 Wires: Red and Black wires connected with Resistor between them, 2 Blue wires connected together (Therefore ONLY 2 wires to connect to Pole wiring) 2 - Wire Nuts included.
* Refer to Wiring Diagram to wire pole for Three Way Switch, Single Toggle Switch, Double Toggle Switch or Line Cord.
* Includes Mounting instructions for Motor
* On Back of Instructions is Template to Locate and Drill Holes in Mounting Plate to mount Motor
* Also includes is 2 Pan Head Bolts and Rubber Grommets used to mount Motor to Mounting Plate
* This motor has a "Brass Cup" affixed to the top of the output shaft
* This motor fits many Paidar & Koch Barber Poles

Barber Pole Wiring Diagram

Barber Pole Part: Type "B" Motor  $104.95   
 

*******************************************************

Barber Pole Part: Brass Cup for Type "B" Motor

* PART: BRASS CUP for Type "B" Motor
* Accepts Type "B" Barber Pole Inner Cylinder
* This is the part that fits on top of the Barber Pole Motor that allows the "Spear" on the Bottom end of the Red, White & Blue inner cylinder to attach to motor
* Has Screw on lower end to fasten Brass Cup to Motor Shaft
* Size: 1/2" Dia. x 7/8" Tall
* Has Hole in Center of Brass Cup to accept Motor Shaft
* Top is dished out with slit from side to side to accept "Spear" on Bottom of inner cylinder

Barber Pole Part: Brass Cup    

This item is shown here for illustration purposes Only and is NOT available by its self.

Only available on Type "B" Motor.

 

Motor Mounting Plates

Barber Pole Part: Motor Mounting Plate for
"A" Type Motor

 

Fits: Marvy poles with 6" or 8" diameter glass Cylinders

Motor Mounting Plate for "A" Type Motor   $ 12.95   
 

*******************************************************

Barber Pole Part: Motor Mounting Plate for
"A-2" Type Motor

 

Fits: Marvy poles with 4" diameter glass Cylinders

Motor Mounting Plate for "A-2" Type Motor   $ 12.95   
 

*******************************************************

Barber Pole Part: Mounting Screws (3) for Plate

These are the screws that hold the Motor Plate on to the pole
* 3 Screws per pack (3 needed for each Pole)
* size 10-32 x 3/8"
* Truss MS Slt Zinc Plate
 

Mounting Screws (3) for Plate   $ 1.35   
 

*******************************************************

Barber Pole Part: Motor Mounting Plate for
"C" Type Motor

 

PART Barber Pole Motor Mounting Plate * Type "C" Plate  fits: MOST Poles with 6" diameter glass Cylinders EXCEPT KOKEN
* Both Type "A" and Type "B" Motors will fit this mounting plate
* Measures 5" center of bolt slots to center of bolt slots
to all 3 corner bolt slots (this is where the plate bolts on to pole)
** For Koch & Paidar poles will need small Mounting Screws
Size: 8-32 x 3/8" (NOT Included)
* The center hole is for the motor shaft.
* The other 5 holes is to bolt the motor onto plate (usually only two bolts are used to bolt on motor)
* The 5 motor mounting holes in the plate are used to position the motor in different locations depending upon the pole it is used in.

Motor Mounting Plate for "C" Type Motor   $ 12.95   
 

*******************************************************

Barber Pole Part: Motor Mounting Plate for
"D" Type Motor

 

Part: Motor Mounting Plate Type "D" fits: Most poles with 8" diameter Glass,Cylinders EXCEPT KOKEN Barber Poles
* Type "D" Plate Mainly used for Koch & Paidar poles with 8" diameter glass cylinders
* Both Type "A" and Type "B" Motors will fit this mounting plate
* Measures 7" center of bolt slots to center of bolt slots
to all 3 corner bolt slots (this is where the plate bolts on to pole)
** For Koch & Paidar poles will need small Mounting Screws
Size: 8-32 x 3/8" (NOT Included)
* The center hole is for the motor shaft.
* The other 5 holes is to bolt the motor onto plate (usually only two bolts are used to bolt on motor)
* The 5 motor mounting holes in the plate are used to position the motor in different locations depending upon the pole it is used in.


 

Motor Mounting Plate for "D" Type Motor   $ 12.95   
 

 

*******************************************************
BARBER POLE parts
* Rubber Grommets *
for Motor Mounting Plate * (2)

 

Rubber Grommets for Motor Mounting Plate * (2)
* The two rubber grommets that fit on the motor mounting plate so when the motor is fasten to the plate the vibration is reduced.

* Material: Rubber
* Color: Black
* fits all US made poles
Barber Pole Part: Rubber Grommets for Motor Mounting Plate $ 2.00
 

*******************************************************

Barber Pole Motor Coil (Standard)

Marvy Barber Pole Part: Motor Coil

 

Fits all standard barber pole motors

Click Here for Detailed Look
and
Click Here for Worded Instructions on Installation

Barber Pole Wiring Diagram

Marvy Barber Pole Part: Motor Coil   $36.95   
 

*******************************************************

Barber Pole Part: 42-Tooth Fibre Gear

* Fits old style motors

Barber Pole Part: 42-Tooth Fibre Gear      *DISCONTINUED

*******************************************************

BARBER POLE Part: 6' Electrical Cord & Toggle Switch

 

Consist of:
* 6 Foot Electrical Cord - 2 Wire with Ground
* 3 Prong Plug
* Toggle Switch - Mounted on Barber Pole on Lower Right Side of Mounting Bracket
* Cord, Plug and Switch Installed on Pole when purchased with pole

BARBER POLE Part: 6' Electrical Cord & Toggle Switch $ 24.95
 

*******************************************************

Barber Pole Part: 3-Way Switch for Barber Poles

* 3-Way Switch
 

Barber Pole Part: 3-Way Switch      *DISCONTINUED * No Longer Available

 

Top Cylinder Bushings

Barber Pole Part: Top Cylinder Bushing 5-3/4"

# 88

5" long (plastic & metal). This bridge, which is a combination of plastic and sheet metal, is used on Marvy No. 88, 824 & Koken poles which use an inner cylinder of 6" diameter. (This bushing is NOT used on Paidar or Koch poles)

Barber Pole Part: Top Cylinder Bushing 5-3/4" * #88   $11.95   
 

*******************************************************

Barber Pole Part: Bridge Strap for
Model # 88 & 824

* 1.5" wide X 9.25" long Metal Bar with U shape shots on end
(1-Green Color and 1- Red Color)
* U shape slots where it is bolted onto pole.
* Has 11/16" hole in center for pipe and screw hole for ground screw.
* This is the part that holds the light sockets onto the pole

Barber Pole Part: Bridge Strap for Model #88 & 824   $14.99   
 

*******************************************************

Barber Pole Part: Light Fixture Strap for Small Paidar Pole

* Light Fixture Bridge Strap for Small Paidar pole (Pole with 6" Diameter Outer Glass Cylinder)
* 1-1/2" wide X 6-7/8" long Metal Bar with U shape shots on each end
* 1/16" Thick Galvanized Steel
* U shape slots where it is bolted onto pole.
* Has 11/16" hole in center for pipe.
* This is the part that holds the light sockets onto the pole

Barber Pole Part: Light Fixture Strap for Small Paidar Pole   $15.95   
 

*******************************************************

Barber Pole Part: Top Cylinder Bushing 3-1/2"

Standard Size

3" long (plastic). Fits Paidar & Koch barber poles;
also fits Marvy No. 55, 66, 77 & 99 poles

This part is attached to the top metal end of the inner cylinder by 2 screws.
It allows the inner cylinder to spin around the light socket.

Barber Pole Part: Top Cylinder Bushing 3-1/2"   $10.95   
 

*******************************************************

Barber Pole Part: Top Cylinder Bushing 3"

Small Size

3" long (plastic). Fits Marvy No. 405, 410, 418, 506, 607 Poles
WILL NOT FIT Koken poles or Paidar & Koch poles

This part is attached to the top metal end of the inner cylinder by 2 screws.
It allows the inner cylinder to spin around the light socket.

Barber Pole Part: Top Cylinder Bushing 3"   $10.95   
 

*******************************************************

Barber Pole Part: Round Top Cylinder Bushing
2-3/4"

Fits Koken Poles Only

2-3/4" (plastic).  This round top cylinder bushing is standard replacement for
Koken Barber Poles which uses a 6" diameter glass cylinder
 
* NO top inner cylinder Screws Needed
* The Bushing is Held in Place by Bending Over the Metal Tabs on the top of the of the Inner Cylinder

Barber Pole Part: Round Top Cylinder Bushing 2-3/4"     
"This item is no longer available. Please see the Barber Pole Part: Top Cylinder Bushing 3-1/2" as a replacement."

*******************************************************

Barber Pole Part: Top Cylinder Screws
(2 Required)

 

Used on all poles where the top bushing is 3” or 3”

Barber Pole Part: Top Cylinder Screws (Pair)   $2.10   
 

 

Books

 The American Barber Shop by Mic Hunter

Welcome to a light-hearted, affectionate closer look at a classic American place: the neighborhood barbershop.

Through entertaining photos and text, author Mic Hunter explores this fondly-remembered world of familiar smells, strewn hair clippings, and good conversation.

For over a decade, Hunter has pursued a commitment to document the life of small, gradually disappearing traditional barbershops.

More than 100 human interest style photos are reproduced in large full-page format. Photos that certainly will flood the reader's thoughts, providing memories of just yesterday, or of the years long gone by. The stories recall the soothing snip of scissors, the hum of the clippers, the idle talk and banter. Very entertaining.
 

The American Barber Shop  $ 19.95   
 

*******************************************************

The Vanishing American Barber Shop

In the most comprehensive book ever written on barber shop history, Ronald Barlow traces the evolution of professional shaving and haircutting. Over 750 vintage photographs and illustrations accompany a text which is both educational and entertaining.

Included in the book are lessons on shaving (with a straight razor) and haircutting as taught in early barber school manuals. For collectors and hobbyists, many pages are painstakingly reproduced in detail from very rare old Barber Supply catalogs. Wooden poles, revolving poles, barber signs, wood and porcelain barber chairs are shown in detail. A must-have book for barber enthusiasts. The price guide section is an invaluable research tool for collectors.

The book devotes several chapters to the memoirs of old-time barbers who actually worked in shops from 1860 to 1960.
Something for everyone.

The Vanishing American Barber Shop  $ 19.95   
 

 

Stainless Steel Domes (tops) and Bowls (bottoms) for Barber Poles

Domes (tops)

Barber Pole Part: Stainless Steel Dome
(Top) - 5-1/8" Diameter

 

* FITS: MARVY No. 333, 405, 410, 418, 405, & 607
* Inside Diameter:  5.125" = 5-1/8"
* Stainless Steel
* Includes Screws

Barber Pole Part: Stainless Steel Dome (Top) * 5-1/8"   $27.95   
 

*******************************************************

Barber Pole Part: Stainless Steel Dome
(Top) - 7-1/8" Diameter

 

* FITS: MARVY No. 44, 55, 66, 77, & 99
* Inside Diameter:  7.125" = 7-1/8"
* Stainless Steel
* Includes Screws
* Two screw holes opposite of each other to fasten on to the pole

Barber Pole Part: Stainless Steel Dome (Top) * 7-1/8"   $38.95   
 

*******************************************************

Barber Pole Part: Stainless Steel Dome
(Top) - 9-1/2" Diameter

Barber Pole Part: Stainless Steel Dome Top
* FITS: MARVY Pole No. 88 & 824
* INSIDE DIA. 9.5" = 9-1/2"
* Stainless Steel
* Like the bowl except has NO drain hole in bottom (Top)
* Has Three (3) equally spaced Screw Holes Under Top Rim to fasten Dome on to Pole
* 3 - Screws Included

Barber Pole Part: Stainless Steel Dome (Top) * 9-1/2"   $49.95   
 

*******************************************************

Paidar & Koch Barber Pole Part: Stainless Steel Dome
(Top) - 9-1/2" Diameter

Barber Pole Part: Stainless Steel Dome Top
* FITS: Paidar & Koch No. 98, 198, 199, 102 & 202
* INSIDE DIA. 9.5" = 9-1/2"
* Stainless Steel
* Like the bowl except has NO drain hole in bottom
* No other holes drilled in this bowl !
* purchaser will need to drill hole to match their pole !!

Paidar & Koch Barber Pole Part: Stainless Steel Dome (Top) * 9-1/2"   $52.95   
 

*******************************************************

Barber Pole Part: Screws for Dome & Bowl
* 6 Screws

* These are the screws that hold the dome or bowl on to the pole
* 6 screws
* Size 10-32 x 3/8" Filister Head MS Stainless

Barber Pole Part: Screws for Dome & Bowl (6)   $2.70   
 

 

Bowls (bottoms)

Barber Pole Part: Stainless Steel Bowl
(Bottom) - 5-1/4"

 

* FITS: MARVY No. 333, 405, 410, 418, 506 & 607
* Inside Diameter: 5.25" = 5-1/4"
* Stainless Steel
* Includes Screws
* Like the dome except has drain hole in bottom just in case water may get inside pole

Barber Pole Part: Stainless Steel Bowl (Bottom) * 5-1/4"   $28.95   
 

*******************************************************

Barber Pole Part: Stainless Steel Bowl
(Bottom) - 7-1/8" Diameter

 

* FITS: MARVY No. 44, 55, 66, 77, & 99
* Inside Diameter:  7.125" = 7-1/8"
* Stainless Steel
* Includes Screws
* Like the dome except has drain hole in bottom just in case water may get inside pole

Barber Pole Part: Stainless Steel Bowl (Bottom) * 7-1/8"   $39.95   
 

*******************************************************

Barber Pole Part: Stainless Steel Bowl
(Bottom) - 9-1/2" Diameter

Barber Pole Part: STAINLESS STEEL Bowl (BOTTOM)
* FITS: MARVY Pole No. 88 & 824
* INSIDE DIA. 9.5"
* Stainless Steel
* Like the dome except has drain hole in bottom just in case water may get inside pole
* Has Three (3) equally spaced Screw Holes Under Top Rim to fasten Bowl on to Pole
* 3 - Screws Included

Barber Pole Part: Stainless Steel Bowl (Bottom) * 9-1/2"   $49.95   
 

*******************************************************

Paidar & Koch Barber Pole Part: Stainless Steel Bowl
(Bottom) - 9-1/2" Diameter
Barber Pole Part: STAINLESS STEEL Bowl (BOTTOM)
* FITS: Paidar & Koch No. 98, 198, 199, 102 &202
* INSIDE DIA. 9.5" = 9-1/2"
* Stainless Steel
* Like the dome except has drain hole in bottom just in case water may get inside pole
* No other holes drilled in this bowl !
* purchaser will need to drill hole to match their pole !

 

Paidar & KochBarber Pole Part: Stainless Steel Bowl (Bottom) * 9-1/2"   $52.95   
 

Two Light Conversion Kits- Barber Pole Wiring Diagram

Barber Pole Part: Two Light Conversion Kit

 SPECIFY Model * Fits # 55, 66, 77 & 99 Marvy Poles

This Conversion Kit will convert Marvy Barber Pole model # 55, 66, 77 or 99 from a standard one-light barber pole to a two-light model.

All parts needed for conversion will be included. (LESS BULB)

Please specify Model number for best results.

Barber Pole Part: Two Light Conversion Kit   $169.95   
 

*******************************************************

Barber Pole Part: Two Light Conversion Kit

Two Light Conversion Kit
SPECIFY Model * Kit for Model # 333, 405, 410, 506, & 607 Marvy Poles

This Conversion Kit will convert Marvy Barber Pole model # 333, 405, 410, 506, or 607 from a standard one-light barber pole to a two-light model.
All parts needed for conversion will be included. (LESS BULB)

* Includes: Electrical Wire, Globe Light Socket, Bridge Strap, Electrical conduit, Top Cylinder Bushing and Light Socket for inner cylinder, Cast Aluminum Two Light Ring and Globe.

Please specify Model number for best results.

Barber Pole Part: Two Light Conversion Kit   $139.95   
 

*******************************************************

Barber Pole Part: Two Light Conversion Kit

Two Light Conversion Kit
SPECIFY Model * Kit for Model # 88 & 824 Marvy Poles


This Conversion Kit will convert Marvy Barber Pole model # 88 or 824 from a standard one-light barber pole to a two-light model.
All parts needed for conversion will be included. (LESS BULB)

* Includes: Electrical Wire, Globe Light Socket, Bridge Strap, Electrical conduit, Top Cylinder Bushing and Light Socket for inner cylinder, Cast Aluminum Two Light Ring and Globe.

Please specify Model number for best results.

Barber Pole Part: Two Light Conversion Kit   $262.95   
 

Special Order Light Fixtures (less Light Bulbs)

Barber Pole Part: One-Light Fixture (less Light Bulb)

PART:
One-Light Fixture
* Specify Brand & Model of Pole (LESS BULB)

* Includes: Bridge Strap, Electrical conduit, Top Cylinder Bushing and Light Socket with Wire.

Barber Pole Part: One-Light Fixture   $42.95   
 

*******************************************************

Barber Pole Part: Two-Light Fixture (less Light Bulb)

* Please specify Brand and Model of pole
* Call 1-800-643-0333 for help

Barber Pole Part: Two-Light Fixture   $56.95   
 

*******************************************************

Barber Pole PART 2-Light Fixture

*Koch/Paidar * SMALL

Small * 2-Light Fixture * Fits: Koch/Paidar Poles (LESS BULBs)
*** Special Order ***
* Fits 6" Dia. Outer Glass Cylinder Koch/Paidar Poles
* Overall Length 9-1/2" * end of light socket to end of light socket
* Bridge Strap Length; 6-7/8"
* Includes: Electrical Wire, Globe Light Socket, Bridge Strap, Electrical conduit, Top Cylinder Bushing and Light Socket for inner cylinder.
* Specify Model # for Koch/Paidar Pole with 6" Dia. Outer Glass Cylinder if you can
* This would fit Paidar Poles # 96, 927 * Also fits Koch Pole # 18, 196, 948

Please specify Model number for best results.

Barber Pole Part: Two-Light Fixture *Koch/Paidar * SMALL  $55.99
 

*******************************************************

Barber Pole Part: Two-Light Ring
Two Light Ring
* Fits Model # 55, 66, 77 & 99 Marvy Poles
* May fit some Koken poles with some modification
* Inside Diameter: 7.125" = 7-1/8"
* This is the part that fits on Top of the Pole that the Globe fits into.
* Buffed out (Shiny) Cast Aluminum
* Replacement part
* Please specify Model number for best results

 

Barber Pole Part: Two-Light Ring   $112.99   
 

*******************************************************

PART Koch/Paidar Two Light Ring

* for Model #909

Barber Pole PART: Koch/Paidar Ruff Cast Aluminum 2-Light Ring * This is the part that fits on Top of the Pole that the Globe fits onto. * ABOVE FOR KOCH FLOOR STAND POLE Model # 909
*** Special Order Part

Two Light Ring
* Fits Koch/Paidar Floor Stand Pole Model # 909
* This is the part that fits on Top of the Pole that the Globe fits onto.
* Dimension: Base 10-3/16" O.D. with 9-13/16L I.D. with Overall Heigth 2-13/16" Tall
* Top is adorn with 3 Brass Angles fasten to the ring and with 3 - Brass Globe Screws threaded thru the angles to attach globe (as Orginaly done on some Paidar/Koch Poles)
* Accodates: 10" Dia. Globe with 4" Opening (NOT Included)
* Comes with 4" O.D. Red Rubber Globe Gasket
* Ruff Cast Aluminum
* You May Paint it as is or Sand and paint it or Sand, Buff it out to a Shinny Finish.
* Replacement part

****** RUFF Cast Aluminum *******

* Please specify Model number for best results.

May Also Fit: *** NO GUARANTEE ****
May need to Retro Fit
Paidar Pole Models: 373, 374 and 376
Koch Pole Models: 910

 

PART Koch/Paidar Two Light Ring * for Model #909 $ 259.95

 

**********************************************

PART BRASS "L" Brackets * fits Koch Two Light Ring

3 Brass "L" Angles that fasten to the light ring includes the 3 - Brass Globe Screws threaded thru the angles to attach globe, also includes the 3 Bolts and 3 nuts to attach the Brass "L" Brackets to the Light Ring.

** as Orginaly done on some Koch/Paidar Two Light Ring

*** Special Order Part

* Please specify Model number for best results.

May Also Fit: *** NO GUARANTEE ****
May need to Retro Fit
Paidar Pole Models: 373, 374 and 376
Koch Pole Models: 910

PART BRASS "L" Brackets * fits Koch Two Light Ring $ 24.00
 

 

Plastic Globes (unbreakable)

Barber Pole Part: Plastic Globe
* 8" with 4" Opening

 

* Fits Marvy No. 55, 66, 77, & 99, Koken & Paidar

Barber Pole Part: Plastic Globe * 8" with 4" Opening   $45.95   
 

 

Glass Globes (Milk White - For top of "Two-Light Poles")

Barber Pole Part: Glass Globe
* 6" with 3" Opening

 

* For Top of "Two-Light" Poles
* Fits a top of Marvy 333, 405, 410, 506 & 607 poles
* 6" with 3" Opening
* Milky White Glass

Barber Pole Part: Glass Globe * 6" with 3" Opening   $28.95   
 

*******************************************************

Barber Pole Part: Glass Globe
* 8" with 4" Opening

 

* For Top of "Two-Light" Poles
* Fits a top of Marvy 55, 66, 77, & 99, some Koken & Paidar Poles
* 8" with 4" Opening
* Milky White Glass

Gasket for this Globe Sold Below

Barber Pole Part: Glass Globe * 8" with 4" Opening   $39.95   
 

*******************************************************

Barber Pole Part Rubber Gasket for Globe * 4" O.D.

 

BARBER POLE PART: Red or Black Rubber Gasket for Globe * 4" O.D.
4" OD x 3-5/16" ID Red or Black Rubber Globe Gasket
Fits: Barber Poles that accepts
the two Globes Sizes: 8" with 4" Opening and 10" with 4" Opening
Fits Marvy Two Light Barber Poles Model # 55TL, 66TL, 77TL & 99TL
as well as some Koken, Koch & Paidar Barber Poles
Color of gasket may be red or black depending on availabity.

***Only ONE rubber gasket per order or per glass globe ordered.***

Barber Pole PART Rubber Gasket for Globe * 4" O.D. $ 5.00
 

*******************************************************

Barber Pole Part: Mounting Screws (3) for Globe

These are the screws that hold the Glass or Plastic GLOBE on to the pole

* 3 needed for each Pole
* Size 10-32 x 3/4"
* Sltd Fillister MS Cadium
* 3 Screws per package

Barber Pole Part: Mounting Screws (3) for Globe   $1.65   
 

*******************************************************

Barber Pole Part: Glass Globe
* 10" with 4" Opening

 

* For Top of "Two-Light" Poles
* Fits a top of Koch & Paidar Poles
* 10" with 4" Opening
* Milky White Glass

Gasket for this Globe Sold Here

Barber Pole Part: Glass Globe * 10" with 4" Opening   $55.95   
 

*******************************************************

Barber Pole Part: Glass Globe
* 10" with 6" Opening

 

* For Top of "Two-Light" Poles
* Fits a top of Marvy 88 & 824 & some Koken Poles
* 10" with 6" Opening
* Milky White Glass

Barber Pole Part: Glass Globe * 10" with 6" Opening   $90.95   
 

Canteen Globe

Barber Pole Part: Canteen Glass Globe
* 12" with 4" Opening

* For Top of "Two-Light" Poles
* Fits a top of Marvy 55, 66, 77, & 99 & some Koken & Paidar Poles
*12" with 4" Opening
* Milky White Glass with "Red Vinyl Lettering"
 

Canteen Glass Globe * 12" with 4" Opening     

"No Longer Made * Out of Stock "

See Similar GLOBE Here

 

BARBER POLE PART:230 Volt LAMP / 15 Watt

* 230-240 Volt
* 15 Watt
* For Marvy Barber Pole Model #333
* Long Life

** FOR POLES WITH 4" DIAMETER GLASS
*** PLEASE NOTE: ABOVE LAMP IS SPECIAL LONG-LIFE LAMP,
GOOD FOR APPROXIMATELY 2,500 HOURS.

 

BARBER POLE PART:230 Volt LAMP / 15 Watt $ 7.99
 

 

_______________________________________________

CacheBeauty.com is the source for the finest in beauty salon equipment!

Other items of interest: index of products

 

 

Flat Irons & Curling Irons

 

Curling Irons

Brush Irons

Crimpers & Flat Irons

Develop 10 Nail Treatment & Nourishment

 

Lotions


Hot Spa Foot Bath


FootBaths

 

  Home:  Index:  Barber Poles:  Barber Pole Parts

Phone: 1-800-643-0333

 

  E-mail

 

    If you don't purchase online then Fax or Mail the No Risk Order Form

 

  Wholesale Login

Copyright © 2014 Cache Beauty Supply, Inc. All Rights Reserved

  Shipping Policy